Nidec Control Techniques Digitax-SF Series - Configuration of Parameter No.62.0 and Rotational Direction of Motor; Example of Input Gain Configuration; Example of Speed Limit Configuration


cw
cw
ccw
ccw
Digitax SF Instruction Manual
Operation
６
6. Operation
3. Velocity Control Mode
3. Velocity Control Mode




rpm
rpm
Parameter No. Setting
rpm
50.0 
51.0 




rpmrpm

Direction of Rotation Parameter No. Setting
rpm

52.0 
53.0 

54.0 
55.0 
Parameter
No.62.0
Input Analog Command Voltage
Positive Voltage Negative Voltage
0
1

