Nidec Control Techniques Digitax-SF Series User Manual


Digitax SF Instruction Manual
Operation
６
6. Operation
3. Velocity Control Mode
3. Velocity Control Mode
2. Internal Velocity Command
Required Parameters
Optional Parameters

ng
Parameter No. Name Setting
2.0 
1o
3.0  3
388.0


1Preset


Name Explanation Parameter No.

 
rpmrpm

390.0


rpmrpm

391.0



392.0 to 399.0


Enable 

  

77.0
 78.0
Parameter
No.
Target
Speed
Setting (
）
rpm
50 W to 750 W
1 kW
1 kW to 2 kW
392.0  
393.0  
394.0  
395.0  
396.0  
397.0  
398.0   
399.0  






Nidec Control Techniques Digitax-SF Series Specifications

General

Brand	Nidec
Model	Control Techniques Digitax-SF Series
Category	Servo Drives
Language	English