4
8. Troubleshooting
Digitax SF Instruction Manual
1. Checking Warnings and Alarms
Checking the Alarm History in Digitax SF Connect
The alarm history area shows a list of the alarms.
2. Using Digitax SF Connect
Turn on the 24 VDC control power to the drive and start Digitax SF Connect.
For information on the warning/alarm, check “Alarm currently occurring” under the [Alarm] tab.
If you are not sure what to do, contact the supplier with the alarm number and its description
for help.
Digitax SF Connect Instruction Manual
Step 1. Select the Alarm tab in Digitax SF Connect.
Step 2. See [Current alarm] and [Cause for the alarm] and [What to do] windows for details.
Step1
Step2
To Next Page
Loading...
Need help?
General
