Oki MC770 - Page 157

45584901TH Rev.1
5-64 /
Oki Data CONFIDENTIAL
[1C63] Terminal IP address unset
Reset the Terminal IP address.
Turn the power OFF and then back ON. Perform the job in error again.
[1C64] Terminal mail address unset
Reset the Terminal mail address.
Turn the power OFF and then back ON. Perform the job in error again.
[1C65] SMTP address unset
Reset the SMTP address and perform the job.
Turn the power OFF and then back ON. Perform the job in error again.
[1C66] Server time-out error
Check if the SMTP server is operating properly.
[1C69] SMTP server connection error
Reset the login name or password of SMTP server and perform the job again.
Check if the SMTP server is operating properly.
[1C6B] Terminal mail address error
Check the SMTP Authentication method.
Check if there is an illegal character in the Terminal mail address.
Set the correct SMTP Authentication method or delete the illegal character and reset the
appropriateTerminalmailaddress,thenperformthejobagain.
[1C6C] Destination mail address error
Check if there is an illegal character in the Destination mail address.
DeletetheillegalcharacterandresettheappropriateDestinationmailaddress,thenperform
the job again.
[1C6D] System error
Turn the power OFF and then back ON. Perform the job in error again.
Iftheerrorstilloccurs,replacetheCUboard.
[1C70] SMTP client OFF
Set the SMTP valid and perform the job again.
[1C71] SMTP authentication error
CheckthatSMTPauthenticationmethod,loginnameandpasswordarecorrect,thenperform
authentication again.
[1C72] POP Before SMTP error
CheckthatboththePOPBeforeSMTPsettingandPOP3settingarecorrect,thenperform
authentication again.
[1CC1] Power failure
Check if the power cable is connected properly and it is inserted securely.
Check if the power voltage is unstable.