EasyManua.ls Logo

Oki MC770 - Page 158

Oki MC770
487 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
45584901TH Rev.1
5-65 /
Oki Data CONFIDENTIAL
[2] RFC related error
[2500] HOST NAME error (RFC: 500) / Destination mail address error (RFC: 500) / Terminal
mail address error (RFC: 500)
[2501] HOST NAME error (RFC: 501) / Destination mail address error (RFC: 501) / Terminal
mail address error (RFC: 501)
Check if the Terminal mail address and Destination mail address are correct. Check if the
mail server is operating properly.
Turn the power OFF and then back ON. Perform the job in error again.
[2503] Destination mail address error (RFC: 503)
[2504] HOST NAME error (RFC: 504)
[2551] Destination mail address error (RFC: 551)
Check if the mail server is operating properly.
TurnthepowerOFFandthenbackON.Performthejobinerroragain.Iftheerrorstilloccurs,
replace the CU board.
[2550] Destination mail address error (RFC: 550)
Check the state of the mail box in the mail server.
[2552] Terminal/Destination mail address error (RFC: 552)
Confirm the size on the mail server.
Transmit again in text mode or with lower resolution or divide the document and transmit
again.
Iftheerrorstilloccurs,turnthepowerOFFandthenbackON.Performthejobinerroragain.
[2553] Destination mail address error (RFC: 553)
Check if there is an illegal character in the mail box in the mail server.
[3] Electronic Filing related error
[2B11] JOB status abnormality
[2B20] File library function error
[2B30] Insufficient disk space in BOX partition
[2BC0] Fatal failure occurred
Erase some data in the Electronic Filing or the shared folder and perform the job in error
again (in case of [2B30]).
Ask the administrator if e-Filing has been disabled. (In case of [2CC1]) Turn the power OFF
and then back ON. Perform the job in error again.
CheckiftherearenootherrunningjobsandperformtheHDDformatting([5]+[C]+[POWER]
ON
[3]
[1]).
Iftherecoveryisstillnotcompleted,replacetheCUboard.
[2B31] Status of specified Electronic Filing or folder is undefined or being created/deleted
CheckifthespeciedElectronicFilingorfolderexists.(Ifno,thiserrorwouldnotoccur.)
Delete the specified Electronic Filing or folder.
Perform the job in error again.

Table of Contents

Other manuals for Oki MC770

Related product manuals