Oki MC770 Maintenance Manual

45584901TH Rev.1
8-7 /
Oki Data CONFIDENTIAL
Notes:
• Thedisplayofitemsonthisscreenvariesdependingonthetypesofdatawritten
on the USB device.
Each item is displayed only when each data file is written on the USB device in
the following conditions.
Item Condition
1.SYSTEMFIRMWARE
(OS Data)
O280SF0Wxxxx.tariswritten.(xxxxisversion.)
2.ENGINEFIRMWARE H282PUPWWxxxx.tariswritten.(xxxxisversion.)
3.SCANNERFIRMWARE H282SUPWWxxxx.tariswritten.(xxxxisversion.)
4.SYSTEMSOFTWARE
(HD Data)
O280HD0Wxxxx.tariswritten.(xxxxisversion.)
• IftheUSBdeviceisnotrecognizedproperly,“USBdeviceNotdetected”message
isdisplayed.Inthiscase,disconnecttheUSBdeviceandconnectagainwithin
3minutes,orshutdowntheequipmentandconnectthedeviceproperly.Then
repeat the procedure from (4).
• Ifanyoftheerrormessagesbelowisdisplayed,conrmifthedataleintheUSB
device is correct.
Then repeat the procedure from (4).
Error
number
Error message Cause
01 ErrorLoadmodule Module loading failed.
02 Machine Model Get Error Model information was
not downloaded.
03 Copy Data with valid signature in USB
Storage
Checking of data file
failed.
04 OthermodelsROMDATATXXXXXXXX
* Theversionnamecomesat“xxxx.xxx.x”.
Master data of other
model are stored.
05 Copy Signature File in USB Storage Data files are not stored
in the USB device.
06 Patch and Normal package in one folder
of USB Storage
Whenboththesystem
and patch update
packages are in the USB
device
(6) Select the item with the digital keys.
 “*”isdisplayednexttotheselecteditem.Displayordeletethe“*”bypressingthe
number of the item.
Item Remarks
1.SYSTEMFIRMWARE(OSData) Updating System firmware
2.ENGINEFIRMWARE Updating PU firmware
3.SCANNERFIRMWARE Updating SU firmware
4.SYSTEMSOFTWARE(HDData) Updating System software

Oki MC770 Specifications

General

Brand	Oki
Model	MC770
Category	All in One Printer
Language	English