Oki MC770 - Page 419

45584901TH Rev.1
11-116 /
Oki Data CONFIDENTIAL
05/08 Mode Element
Sub
element
Item Subitem Code
Sub-
code
Details
Default
value
Acceptable
value
RAM Contents
Proce-
dure
08 Setting
Mode
System User
interface
8724 Display setting of
Edit From Address
button for Scan to
email
1 0-1 SYS 0: Not displayed (From Address cannot be edited)
1: Displayed (From Address can be edited)
1
08 Setting
Mode
System User
interface
8725 Display setting
of [SETTING]->
CHANGE
LANGUAGEbutton
1 0-1 SYS Setswhetherthe[CHANGELANGUAGE]button
accessed from [SETTING] button is displayed or not.
Use this code to prohibit users from changing the
language displayed on the control panel. Administrators
can change the language.
0: Not displayed
1: Displayed
1
08 Setting
Mode
System General 8726 Job deletion on the
Job Status screen
0 0-1 SYS Use this code to enable the job deletion on the [Job
Status]screen.When"3:Highlevel"issetforcode08-
8911,besuretodisablethissetting.
0: Disabled
1: Enabled
1
08 Setting
Mode
System User
interface
Card reading device 8727 Display of dedicated
screen for card
authentication
0 0-1 SYS Switches whether the message to hold a card over the
card reader is displayed on the login screen when the
card authentication is enabled.
0: Disabled
1: Enabled
1
08 Setting
Mode
System User
interface
Display setting 8738 E-mail address
direct input button
1 0-1 SYS Switches the display setting of the [INPUT @] button.
0: Not displayed
1: Displayed
1
08 Setting
Mode
System User
interface
Display setting 8744 Switchover of pop-
up display during
scanning
1 0-1 SYS Switches the pop-up display during scanning
0: Not displayed
1: Displayed
1
08 Setting
Mode
System User
interface
8745 Enable/Disable
settingofEWB
history
0 0-1 SYS Setswhetherpartofthecookie,password,andform
dataofuserwhologsintoEWBissavedornot.
0: Disabled
1: Enabled
1
08 Setting
Mode
System Network 8746 Port number setting
of destination 10 for
sending trap
162 1-65535 NIC Sets the port number of destination 10 for sending
SNMP trap. If the port is used when using the real time
lognoticationfunction,changetheportnumber.
12
08 Setting
Mode
System User
interface
8748 Input of department
code at user
authentication
0 0-1 SYS 0:Notrequired
1:Required
1
08 Setting
Mode
System Network 8749 User authentication
by logon information
to domain (external
authentication)
0 0-1 SYS 0: Disabled
1: Enabled
1