68
Specifications Section 2-2
Transistor Outputs (Sinking or Sourcing)
Normal Outputs
Note (1) The fuse cannot be replaced by the user.
(2) Also do not exceed 0.9 A for the total for CIO 100.00 to CIO 100.03.
(3) The bits that can be used depend on the model of the CPU Unit. 
!Caution Do not connect a load to an output terminal or apply a voltage in excess of the
maximum switching capacity.
Pulse Outputs (CIO 100.00 to CIO 100.03)
Item Specification
CIO 100.00 to CIO 100.03 CIO 100.04 to CIO 100.07 (See note 3.)
Max. switching capac-
ity
4.5 to 30 VDC, 300 mA/output, 0.9 A/common, M60D@-D 5.4 A/Unit 
M40D@-D 3.6 A/Unit 
M30D@-D 2.7 A/Unit
L20D@-D 1.8 A/Unit
L14D@-D 1.5 A/Unit (See note 2.)
L10D@-D 0.9 A/Unit (See note 2.)
J20D@-D 1.8 A/Unit 
J14D@-D 1.4 A/Unit
Min. switching capacity 4.5 to 30 VDC, 1 mA
Leakage current 0.1 mA max.
Residual voltage 0.6 V max. 1.5 V max.
ON delay 0.1 ms max.
OFF delay 0.1 ms max. 1 ms max.
Fuse 1 fuse/output (See note 1.)
Circuit configuration • Normal outputs CIO 100.00 to CIO 100.03 
(Sinking Outputs)
• Normal outputs CIO 100.00 to CIO 100.03 
(Sourcing Outputs)
• Normal outputs CIO 100.04 to CIO 101.07 
(Sinking Outputs)
• Normal outputs CIO 100.04 to CIO 101.07 
(Sourcing Outputs)
OUT
OUT
COM (−)
L
L
Internal 
circuits
Internal 
circuits
24 VDC/ 
4.5 to  
30 VDC
OUT
OUT
COM (+)
L
L
Internal 
circuits
Internal 
circuits
24 VDC/ 
4.5 to  
30 VDC
OUT
OUT
COM (−)
L
L
Internal 
circuits
24 VDC/4.5 
to 30 VDC
OUT
OUT
COM (+)
L
L
Internal 
circuits
24 VDC/4.5 
to 30 VDC
Item Specification
Max. switching capacity 30 mA/4.75 to 26.4 VDC
Min. switching capacity 7 mA/4.75 to 26.4 VDC
Max. output frequency 100 kHz
Output waveform
4 µs min.
2 µs min.
ON 
90% 
10%
OFF