Omron CP1L - Page 483

449
Analog I/O Units Section 7-4
(2) Expansion I/O Connecting Cable
Connected to the expansion connector of a CP1L CPU Unit or a CMP1A
Expansion Unit or Expansion I/O Unit. The cable is provided with the
Analog I/O Unit and cannot be removed.
!Caution Do not touch the cables during operation. Static electricity may cause operat-
ing errors.
(3) Expansion Connector
Used for connecting Expansion Units or Expansion I/O Units.
(4) DIP Switch
Used to enable or disable averaging.
Main Analog I/O Unit
Specifications
Analog I/O Units are connected to the CP1L CPU Unit. For CP1L M-type CPU
Units, up to three Units can be connected, including any other Expansion
Units and Expansion I/O Units that are also connected.
Pin1: Average processing for analog input 0
(OFF: Average processing not performed; ON: Average processing performed)
Pin2: Average processing for analog input 1
(OFF: Average processing not performed; ON: Average processing performed)
SYSMAC
CP1L
L1 L2/N COM 01 03 05 07 09 11 01 03 05 07 09 11
00 02 04 06 08 10 00 02 04 06 08
10
00 01 02 03 04 06 00 01 03 04 06
COM COM COM COM 05 07 COM 02 COM 05
07
IN
OUT
IN
00
CH
CH
02 04 06 08
10
OUT
01COM 03 05070911
COM COM COM 03COM
06
00 01 02 04 05
07
00 01 02 03 04 05 06
07
08 09 10
11
20EDR1
CH
00 01 02 03 04 05 06
07
NC
NC
NC
CH
EXP
IN
00 02
01COM 03
COM 0507
04 06
CH
00 01 02 03
08 09 10 11
8ED
EXP
NC
NC
CP1W-20EDR1/
CPM1A-20EDR1
Expansion I/O Unit
CP1W-8ED/
CPM1A-8ED
Expansion I/O Unit
CP1W-MAD11/
CPM1A-MAD11
Analog I/O Unit
1 analog output 2 analog inputs
CP1L M-tpye CPU Unit
For CP1L M-type CPU Units, a maximum
of 3 Expansion Units or Expansion I/O
Units can be connected.