Omron CP1L - Page 569

535
LCD Option Board Function Section 8-6
5. Press the OK button to enter the Calendar Timer Screen.
The final digit of the Timer No. will be flashing.
The following table shows the setting items.
6. Use the Up button to change the Timer No. to
6 .
7. Use the Forward button to move the column cursor to the timer flag posi-
tion.
Press the Up button to select the timer flag
Y .
8.
Use the Forward button to move the column cursor to the ON date position.
Use the Up button to change the date to 06/01 .
9. Use the Forward button to move the column cursor to the OFF date posi-
tion.
Use the Up button to change the date to
10/01 .
10. Use the Forward button to move the column cursor to the position of con-
trol bit.
Press the Up button to select
HR .
11. Use the Forward button to move the column cursor to the position of word
address.
The present setting is default address.
12. Move the column cursor to the digit to be set.
Use the Up button to change the word address to
209 .
a
b
c
d
ef
No. Description
a Timer flag
b Timer No. (01 to 16)
c ON date of PLC
d OFF date of PLC
e Word type
f Word address