Omron CP1L - Page 658

624
Auxiliary Area Allocations by Address Appendix D
A36 07 Error Counter
Alarm Flag 1
This flag turns ON when an alarm
occurs in the error counter for
inverter positioning 1.
ON: Error
counter alarm
OFF: No error
counter alarm
--- Cleared When
pulse out-
put to error
counter is
stopped
and abso-
lute value
of error
counter
present
value is
greater
than or
equal to
error
counter
alarm
detection
value
---
15 Inverter Posi-
tioning Output
Value Sign
Flag 1
This flag is ON when the inverter
positioning 1 output value is positive
and is OFF when it is negative.
ON: Positive
value
OFF: Nega-
tive value
--- Cleared When
signed out-
put value is
between
FFFF
FFFF and
8000 0000
---
A38
and
A39
Present Value
of Pulse Out-
put to Inverter
1, Relative
Value
These words contain the relative
value of the internal pulse output
when pulses are being output to the
error counter for inverter positioning
1.
Data range: 8000 0000 to 7FFF
FFFF hex (−2,147,483,648 to
2,147,483,647)
A38 contains the leftmost 4 digits
and A39 contains the rightmost 4
digits.
--- --- Cleared Every error
counter 1
cycle
---
A90 to
A93
All User Program
Date
These words contain in BCD the
date and time that the user program
was last overwritten.
A90.00 to A90.07:
Seconds (00 to 59)
A90.08 to A90.15:
Minutes (00 to 59)
A91.00 to A91.07: Hour (00 to 23)
A91.08 to A91.15:
Day of month (01 to 31)
A92.00 to A92.07: Month (01 to 12)
A92.08 to A92.15: Year (00 to 99)
A93.00 to A93.07: Day of the week
(00: Sunday, 01: Monday, 02: Tues-
day, 03: Wednesday, 04: Thursday,
05: Friday, 06: Saturday)
--- Retained Retained --- ---
A94 to
A97
All Parameter
Date
These words contain in BCD the
date and time that the parameters
were last overwritten.
The format is the same as above.
--- Retained Retained --- ---
Address Name Function Settings Status
after
mode
change
Status
at star-
tup
Write
timing
Related
flags, set-
tings
Words Bits