Omron CX-PROGRAMMER V9 - Page 163

PART 1: CX-Programmer
CHAPTER 4 – Reference OMRON
CX-Programmer _Page 80
Filter Symbol Button and enter a text string in the Filter Symbol Dialog Box to limit the search to
symbols with symbol names or I/O comments that contain the specified text string. A list of these
address_comment or name_address_comment combinations will be displayed in the drop-down list.
Input the required item by selecting it from the list. Use this procedure to increase input efficiency
when inputting symbols or comments that have been input before.
This procedure can be used when inputting both programs and function block definitions.
Example:
1 Click the Filter Symbol Button.
2 Enter a user-specified text string in the Symbol/Address Input field in the Filter Symbol Dialog
Box.
Example: Enter temp in the Symbol/Address Input field.
3 Click the
button to display the drop-down list.