CX-Programmer_Page (xix)
CJ1-H/CJ1M CPU Units
CJ1-H CPU Units CJ1M CPU Units
(CJ1H-CPU@@H-R)
(CJ1@-CPU@@H)
(CJ1G-CPU@@P)
CJ1M-CPU12/13/22/23 CJ1M-
CPU11/21
Function
Pre-Ver. 2.0
CPU Units
CPU Units
Ver. 2.0
Pre-Ver. 2.0
CPU Units
CPU Units
Ver. 2.0
CPU Units
Ver. 2.0 or
later
Downloading and Uploading
Individual Tasks
--- OK --- OK OK
Improved Read Protection
Using Passwords
--- OK --- OK OK
Write Protection from FINS
Commands Sent to CPU Units
via Networks
--- OK --- OK OK
Online Network Connections
without I/O Tables
OK, but only if
I/O table
allocation at
power ON is set
OK OK, but only if
I/O table
allocation at
power ON is set
OK OK
Communications through a
Maximum of 8 Network Levels
OK for up to 8
groups
OK for up to 64
groups
OK for up to 8
groups
OK for up to 64
groups
OK for up to 64
groups
Connecting Online to PLCs via
NS-series PTs
OK from lot
number 030201
OK OK from lot
number 030201
OK OK
Setting First Slot Words
--- OK --- OK OK
Automatic Transfers at Power
ON without a Parameter File
--- OK --- OK OK
Automatic Detection of I/O
Allocation Method for
Automatic Transfer at Power
ON
--- OK --- OK OK
Operation Start/End Times
--- OK --- OK OK
MILH, MILR,
MILC
--- OK --- OK OK
=DT, <>DT, <DT,
<=DT, >DT,
>=DT
--- OK --- OK OK
BCMP2
--- OK OK OK OK
GRY
OK from lot
number 030201
OK OK from lot
number 030201
OK OK
TPO
--- OK --- OK OK
DSW, TKY, HKY,
MTR, 7SEG
--- OK --- OK OK
EXPLT, EGATR,
ESATR, ECHRD,
ECHWR
--- OK --- OK OK
Reading/Writing
CPU Bus Units
with IORD/IOWR
--- OK --- OK OK
New
Application
Instructions
PRV2
--- --- --- OK, but only for
models with
built-in I/O
OK, but only for
models with
built-in I/O
To Next Page
Loading...
Need help?
General