PART 2: CX-Server PLC Tools
CHAPTER 12 – PLC Backup Tool OMRON
CX-Server PLC Tools_Page 154
Comparing Data
Data in backup files can be compared with data from other backup files or data from connected PLC, and the
results shown.
Target PLC
PLC Backup Tool
CPU Unit + Configuration Units
(CPU Bus Units and Special I/O Units)
Verify
Backup folder
Default name:
C\Backup\yymmdd_hhmmss
Backup files can be restored after the comparison results have been displayed. Also, the comparison results can be
saved in a CSV file.
Overview of Procedure
Start
Select
PLC Backup Tool
from
the Tools Menu of the
CX-Programmer.
Select
Programs – OMRON –
CX-One – CX Programmer –
PLC Backup Tool
from the
Windows Start Menu.
↓
↓
Click the
Communication
Settings Button in the PLC
Backup Tool Dialog Box.
↓
Select the PLC Direct Connection
or Connection via Gateway
Option and click the Change
Settings
Button.
↓
Set the target PLC in the Change
PLC Dialog Box.
↓
Communi-
cations
settings
The communications settings
are inherited from the
CX-Programmer.
(The PLC Backup Tool Dialog
Box will return.)
↓
↓
Click the Compare Button.
↓
Select the source backup file and the destination backup file or PLC.
↓
•
Not Selecting the Units to
Compare
•
Selecting the Units to Compare
Click the Compare Button.
↓
Check the target PLC in the Confirm Connection Dialog Box and click
the OK Button.
↓
Select the Units to compare in the Selects
Comparison Target Dialog Box
↓
Click the
Compare
Button.
↓
Verify
(Data compared.)
To Next Page
Loading...
Need help?
General