Omron CX-PROGRAMMER V9 - Default GPPQ Keyboard Mapping (CX-Programmer Ver. 9.@ Only)

PART 1: CX-Programmer
Keyboard Shortcuts − CX-Programmer OMRON
CX-Programmer _Page 132
Insert Vertical Down [Insert] | [Vertical] | [Vertical Down] [F5], [Ctrl]+[Down], [V], [|]
Insert Open Coil [Insert] | [Coil] | [Normally Open] [F6], [O]
Insert Closed Coil [Insert] | [Coil] | [Normally Closed] [F7], [Q]
Insert Instruction [Insert] | [Instruction...] [F8], [F9], [F10], [I]
Compile all PLC programs [PLC] | [Compile All PLC Programs] [Shift]+[F8]
Open Section/Rung Manager [Programs] | [Section/Rung Manager...] [Ctrl]+[F5]
Edit Rung Comment [Edit] | [Edit Rung Comment] [Ctrl]+[F7]
Show as Statement List [Edit] | [Rung] | [Mnemonics] [Ctrl]+[F8], [Ctrl]+[Alt]+[S]
Find and Replace
Function Menu Shortcut keys
Edit rung comment [Edit] | [Go To] | [Commented Rung] [Shift]+[F5], [L], [Alt]+[Shift]+[R]
Online
Function Menu Shortcut keys
Work on-line [PLC] | [Work Online] [Shift]+[F9], [Ctrl]+[W]
Monitoring (PLC level toggle) [PLC] | [Monitor] | [Monitoring] [Ctrl]+[F11]
Default GPPQ Keyboard Mapping (CX-Programmer Ver. 9.@ Only)
Basic Operations
The shortcuts for all basic operations are the same as the defaults for the CX-Programmer.
Edit Program
Shortcuts for all functions except for the following are the same as the defaults for the CX-Programmer.
Function
Menu Shortcut keys
Edit Row Comment [Edit] | [Row Comment] [Shift]+[F10]
Insert Open Contact Classic Style [Insert] | [Contact] | [Normally Open] [F5], [C]
Smart Style ---
Insert Closed Contact Classic Style [Insert] | [Contact] | [Normally Closed] [F6], [/]
Smart Style ---
Insert Open Contact OR Classic Style [Insert] | [Contact] | [Normally Open
OR]
[Shift]+[F5], [W]
Smart Style ---
Insert Closed Contact OR Classic Style [Insert] | [Contact] | [Normally Closed
OR]
[Shift]+[F6], [X]
Smart Style ---
Insert Horizontal Right Classic Style [Insert] | [Horizontal Right]
Smart Style ---
[F9], [Ctrl]+[Right], [H],
[-]
Insert Vertical Down Classic Style [Insert] | [Vertical] | [Vertical Down]
Smart Style ---
[Shift]+[F9],
[Ctrl]+[Down], [V], [|]
Delete Horizontal Connection --- [Ctrl]+[F9]
Delete Vertical Connection --- [Ctrl]+[F10]
Insert Open Coil Classic Style [Insert] | [Coil] | [Normally Open] [F7], [O]
Smart Style ---
Insert Instruction Classic Style [Insert] | [Instruction...] [F8]
Smart Style ---
Compile all PLC programs Classic Style [PLC] | [Compile All PLC Programs] [F4]
Smart Style ---
Compile program [Programs] | [Compile] ---
Show Symbols Comments
Classic Style [View] | [Show Symbol Comments] [Ctrl]+[F5]
Smart Style [View] | [Ladder Information] | [Show
Symbol Comments]
Show Rung Annotations Lists Classic Style [View] | [Show Rung Annotations Lists] [Ctrl]+[F8]
Smart Style [View] | [Ladder Information] | [Show
Rung Annotations Lists]