Omron CX-PROGRAMMER V9 - Page 214

PART 1: CX-Programmer
OMRON Keyboard Shortcuts − CX-Programmer
CX-Programmer _Page 131
Edit Program
Shortcuts for all functions except for the following are the same as the defaults for the CX-Programmer.
Function
Menu Shortcut keys
Delete a column [Edit] | [Delete Column] [Shift]+[F3], [Ctrl]+[Alt]+[Right]
Invert (NOT) contacts/coils [Edit] | [Invert (NOT)] [F9], [/]
Insert Column [Insert] | [Column] [Shift]+[F2], [Ctrl]+[Alt]+[Right]
Insert Open Contact [Insert] | [Contact] | [Normally Open] [F4], [F5], [C]
Insert Closed Contact [Insert] | [Contact] | [Normally Closed] [Shift]+[F5], [/]
Insert Open Contact OR [Insert] | [Contact] | [Normally Open OR] [F5], [W]
Insert Closed Contact OR [Insert] | [Contact] | [Normally Closed OR] [Shift]+[F5], [X]
Create a new SET function None [Shift]+[F8]
Create a new RSET function None [Shift]+[F9]
Insert Horizontal Right [Insert] | [Horizontal Right] [F8], [Ctrl]+[Right], [H], [-]
Insert Vertical Up [Insert] | [Vertical] | [Vertical Up] [F6], [Ctrl]+[Up], [U]
Insert Open Coil [Insert] | [Coil] | [Normally Open] [F7], [O]
Insert Closed Coil [Insert] | [Coil] | [Normally Closed] [Shift]+[F7], [Q]
Insert Instruction [Insert] | [Instruction...] [F10], [Shift]+[F10], [I]
Edit rung comment [Edit] | [Edit Rung Comment] [Alt]+[F12]
Compile all PLC programs [PLC] | [Compile All PLC Programs] [Ctrl]+[F8]
Edit Section/Rung Manager [Program] | [Section/Rung Manager] [Ctrl]+[F10]
Store at Read Only Mode [Edit]|[Read Only Mode Edit]|[Store] [F3]
Find and Replace
Shortcuts for all functions except for the following are the same as the defaults for the CX-Programmer.
Function
Menu Shortcut keys
Find [Edit] | [Find] [Shift]+[F3], [Ctrl]+[F]
Online
Shortcuts for all functions except for the following are the same as the defaults for the CX-Programmer.
Function
Menu Shortcut keys
Monitor in RungWrap [View] | [Monitor in RungWrap] [Shift]+[F11]
Monitor in Hex [View] | [Monitor In Hex] [Alt]+[F10]
Force on [PLC] | [Force] | [On] [Alt]+[F2], [Ctrl]+[J]
Force off [PLC] | [Force] | [Off] [Alt]+[F3], [Ctrl]+[K]
Cancel (Forced on or off) [PLC] | [Force] | [Cancel] [Alt]+[F5], [Ctrl]+[L]
Cancel All Forces [PLC] | [Force] | [Cancel All Forces] [Alt]+[F7]
Default SYSWIN Keyboard Mapping
Basic Operations
Function Menu Shortcut keys
Open Project [File] | [Open] [Shift]+[F2], [Ctrl]+[O]
Save project [File] | [Save] [Shift]+[F3], [Ctrl]+[S]
Edit Program
Function Menu Shortcut keys
Delete a row [Edit] | [Delete Row] [Shift]+[F7], [Ctrl]+[Alt]+[Up]
Zoom to Fit [View] | [Zoom to Fit] [Alt]+[Up]
Insert Open Contact [Insert] | [Contact] | [Normally Open] [F2], [C]
Insert Closed Contact [Insert] | [Contact] | [Normally Closed] [F3], [/]
Insert Horizontal Right [Insert] | [Horizontal Right] [F4], [Ctrl]+[Right], [H], [-]