CX-Programmer_Page (xxvi)
Unit Versions and Programming Devices for CPU Units Other Than CJ2 CPU Units
Required Programming Device
CX-Programmer
CPU Unit Functions
Ver. 3.3 Ver. 4.0 Ver. 5.0
Ver. 6.0
Ver. 7.0 Ver. 7.2 Ver. 8.0
or later
CS/CJ Series CPU
Units, Unit Ver. 4.0
Functions added for unit
version 4.0
∆ ∆ ∆
❍ ❍ ❍
(See note
4.)
CS/CJ Series CPU
Units, Unit Ver. 3.0
Functions added for unit
version 3.0
∆ ∆
❍ ❍ ❍ ❍
CS/CJ Series CPU
Units, Unit Ver. 2.0
Functions added for unit
version 2.0
∆
❍ ❍ ❍ ❍ ❍
CS1D CPU Units for
Single-CPU Systems,
Unit Ver. 2.0
Functions added for unit
version 2.0
∆
❍ ❍ ❍ ❍ ❍
CS1D CPU Units for
Duplex-CPU Systems,
Unit Ver.1.1
Functions added for unit
version 1.1
∆
❍ ❍ ❍ ❍ ❍
×: Cannot be used, ∆: Can be used except for new functions added for unit versions, ❍: Can be used
Note 1. As shown above, there is no need to upgrade to CX-Programmer version 4.0 as long as
the functions added for unit version 2.0 or unit version 1.1 are not used.
2. CX-Programmer version 7.0 or higher is required to use functions added for unit version
4.0. Additional functions are supported if CX-Programmer version 7.2 or higher is used.
3. Unit version 4.2 of the CJ1H-CPU6@-R is supported only by CX-Programmer version 8.0
or higher.
4. CX-Programmer version 8.0 or higher is required to use unit version 4.2 of the CJ1H-
CPU6@-R.
Unit Versions of CP-series CPU Units and Programming Devices
CX-Programmer version CPU Unit Model Unit
version
Ver. 6.11 Ver. 6.20 Ver. 7.11 Ver. 8.2
or later
CP1H-X@@@@-@
Ver. 1.1 OK OK OK OK
CP1H-XA@@@@-@
Ver. 1.0 OK OK OK OK
CP1H CPU Units
CP1H-Y@@@@-@
Ver. 1.1 --- OK OK OK
CP1L-M@@@@-@
CP1L CPU Units
CP1L-L@@@@-@
Ver. 1.0 --- --- OK OK
CP1E-E@@D@-A
CP1E CPU Units
CP1E-N@@D@-@
Ver. 1.0 --- --- --- OK
Note 1. Functionality of CP1H CPU Units with unit version 1.0 or 1.0 and CP1L CPU Units with
unit version 1.0 is the same as that for CS/CJ-series CPU Units with unit version 3.0.
The functionality added for CS/CJ-series CPU Unit unit version 4.0 is not supported.
2. There is no need to upgrade to CX-Programmer as long as the upgraded functionality is
not used.
To Next Page
Loading...
Need help?
General