PART 1: CX-Programmer
CHAPTER 4 – Reference OMRON
CX-Programmer _Page 84
1, 2, 3…
1. Select the program section to be copied.
*1
2. Select Address Incremental Copy from the Edit Menu.
The Address Incremental Copy Dialog Box will be displayed.
*1: If a function block is used in the selected section, this item cannot be selected from the
menu.
3. In the Offset Field, input 16 in the Bit Box and 10 in the CH Box.
4. Click the Paste Button.
The addresses will be automatically incremented and the program section will be
automatically pasted. The I/O comments will be automatically created.
To Next Page
Loading...
