PART 2: CX-Server PLC Tools
OMRON CHAPTER 2 – PLC Memory Component
CX-Server PLC Tools_ Page 17
4. Select the Prompt Before Closing an Active Monitor Window option if confirmation is
required before closing a data area window that is being monitored.
5. Select the Beep on Invalid Input option to receive an audible beep when an invalid input to
the PLC Memory component has been made.
6. Select the Fast Window Update option to reduce the affect of flickering when monitoring.
7. Select the OK pushbutton to accept the settings or the Cancel pushbutton to abort the
operation.
The File tab permits the setting of header information into PLC memory component files. Use the following
procedure to change the file information.
1, 2, 3…
1. Select the Preferences option from the View menu.
2. Select the File tab.
3. Insert a file name in the File Name field.
4. Insert a comment in the Comment field.
5. Select the OK pushbutton to accept the settings or the Cancel pushbutton to abort the
operation.
To Next Page
Loading...
Need help?
General