PART 2: CX-Server PLC Tools
OMRON CHAPTER 10 – Data Links
CX-Server PLC Tools_ Page 109
Reference: Size modifications and offsets can be set in the Area Specify dialog box that is
displayed by double-clicking on the data link configuration icon (oval for send area
or rectangular for receive area ).
Area Specify Dialog Box (Send Area)
Specify send size.
Offset cannot be changed.
Area Specify Dialog Box (Receive Area)
Specify send size.
Offset cannot be changed.
Note: With SYSMAC LINK, the send size can be set, but the receive size and the reception
offset cannot. Therefore, the Area Specify dialog boxes are as shown in the following
example diagrams.
• Send Area • Receive Area
Can be set.
Cannot be set.
To Next Page
Loading...
