Oracle Database Appliance X10 User Manual

10. Return the server to operation.
a. Install the air baffle.
See Install the Air Baffle.
b. Install the server top cover.
See Install the Server Top Cover.
c. Return the server to the normal rack position.
See Return the Server to the Normal Rack Position.
d. Reconnect the power cords to the power supplies, and power on the server.
See Powering On Oracle Database Appliance.
e. Verify that the power supply AC OK LED is lit.
11. Use Oracle ILOM to clear server processor faults.
a. To show server faults: log in to the server as root using the Oracle ILOM CLI,
and type the following command to list all known faults on the server:
-> show /SP/faultmgmt
The server lists all known faults, for example:
-> show /SP/faultmgmt
Targets:
shell
0 (/SYS/MB/P0)
Properties:
Commands:
cd
show
Alternatively, log in to the Oracle ILOM service processor from the Oracle
ILOM Fault Management Shell and issue the fmadm faulty command. For
more information about how to use the Oracle ILOM Fault Management Shell
and supported commands, see the Oracle ILOM User's Guide for System
Monitoring and Diagnostics at Oracle ILOM Documentation.
Chapter 5
Servicing Processors (FRU)
5-18

Oracle Database Appliance X10 Specifications

General

Brand	Oracle
Model	Database Appliance X10
Category	Storage
Language	English