DIMM and Processor Physical Layout 4-9
DIMM Population Scenarios 4-10
DIMM Population Rules 4-10
Populating DIMMs for Optimal System Performance 4-11
Using the Server Fault Remind Button 4-12
Identify and Remove a DIMM 4-13
Install a DIMM 4-14
Servicing PCIe Cards (CRU) 4-15
PCIe Slot Locations 4-16
Adding Optional PCIe Cards (CRU) 4-16
Remove a Half Height PCIe Card 4-18
Install a Half Height PCIe Card 4-20
Servicing the Battery (CRU) 4-22
Remove the Battery 4-22
Install the Battery 4-25
5
Servicing FRUs
Servicing Processors (FRU) 5-1
Processor Overview 5-2
Identify and Remove a Processor 5-3
Install a Processor 5-12
Servicing the Fan Tray (FRU) 5-19
Remove the Fan Tray 5-19
Install the Fan Tray 5-21
Servicing the Disk Backplane (FRU) 5-22
Remove the 4-Drive Backplane 5-23
Install the 4-Drive Backplane 5-26
Remove a Disk Backplane Cable 5-30
Install a Disk Backplane Cable 5-32
Servicing the Front LED Indicator Module (FRU) 5-33
Remove the Front LED Indicator Module 5-34
Install the Front LED Indicator Module 5-36
Servicing the PCIe Slot Flyover Cable (FRU) 5-37
Remove the PCIe Flyover Cable 5-37
Install the PCIe Flyover Cable 5-38
Servicing the Motherboard Assembly (FRU) 5-39
Remove the Motherboard Assembly 5-40
Install the Motherboard Assembly 5-49
Component Fault Management 5-52
v
To Next Page
Loading...
Need help?
General