range Pi User Manual Copyright reserved by Shenzhen Xunlong Software Co., Ltd
91
b. After entering the TF card and eMMC boot image folder, you can see the
following tow images, the difference between them is:
a) The first image is dedicated to HDMI display and supports 4K display. If
you don’t use LCD screen, please download the image without lcd
b) If you want to use lcd screen, please choose image with lcd
6) Then use the decompression software to decompress the compressed package of the
downloaded Android image. Among the decompressed files, the file ending with ".img" is
the Android image file, and the size is more than 1GB
7) Then use decompression software to decompress SDDiskTool_v1.72.zip, this
software does not need to be installed, just find SD_Firmware_Tool.exe in the
decompressed folder and open it
8) After opening SDDiskTool, if the TF card is recognized normally, the inserted disk
device will be displayed in the "Select Removable Disk Device" column. Please make
sure that the displayed disk device is consistent with the drive letter of the TF card
you want to burn, if there is no display, you can try to unplug the TF card.
To Next Page
Loading...