Panasonic FP-XH Series

4. Press the [OK] button.
The screen returns to the ladder edit screen. The settings will be downloaded to the PLC
together with programs and comments.
System register relating to high-speed counter output
Classification No. and setting item Settings
Pulse I/O cassette
setting
(HSC / PLS)
400
High-speed
counter setting
(X100 to X102)
CH8
Select either Addition input (X100), Subtraction input
(X100), 2-phase input (X100, X101), Individual input
(X100, X101), or Direction distinction input (X100,
X101). You can also select a combination with Reset
input (X102).
CH9
Select either Addition input (X101) or Subtraction
input (X101). You can also select a combination with
Reset input (X102).
401
High-speed
counter setting
(X200 to X202)
CHA
Select either Addition input (X200), Subtraction input
(X200), 2-phase input (X200, X201), Individual input
(X200, X201), or Direction distinction input (X200,
X201). You can also select a combination with Reset
input (X202).
CHB
Select either Addition input (X201) or Subtraction
input (X201). You can also select a combination with
Reset input (X102).
Control Unit input
settings
(HSC)
402
High-speed
counter
(X0 to X7)
CH0
Select either Addition input (X0), Subtraction input
(X0), or 2-phase input (X0, X1).
CH1
Select either Addition input (X1) or Subtraction input
(X1).
CH2
Select either Addition input (X2), Subtraction input
(X2), or 2-phase input (X2, X3).
CH3
Select either Addition input (X3) or Subtraction input
(X3).
10.2 System Register Settings
WUME-FPXHPOSG-01 10-9