Panasonic FP-XH Series

Classification No. and setting item Settings
CH4
Select either Addition input (X4), Subtraction input
(X4), or 2-phase input (X4, X5).
CH5
Select either Addition input (X5) or Subtraction input
(X5).
CH6
Select either Addition input (X6), Subtraction input
(X6), or 2-phase input (X6, X7).
CH7
Select either Addition input (X7) or Subtraction input
(X7).
(Note 1) Displayed items and ranges vary depending on models of the Control Unit.
(Note 2) Select "Not set XX as High Speed Counter" for the input that is not used for the high-speed
counter function.
10.2 System Register Settings
10-10 WUME-FPXHPOSG-01