Panasonic KX-NS500 - Page 1019

• 10.9 PBX Configuration—[2-9] System—System Options—Option 8— Conference Group—Maximum
Number of Speakers During a Conference Group Call
• 11.9 PBX Configuration—[3-9] Group—Conference Group
• 11.9.1 PBX Configuration—[3-9] Group—Conference Group—Member List
Feature Guide References
2.15.1 Conference Group Call
Confirmation Tone
• 10.9 PBX Configuration—[2-9] System—System Options—Option 3
– Confirmation Tone—Tone 1 : Called by Voice
– Confirmation Tone—Tone 2 : Paged / Automatic Answer
– Confirmation Tone—Tone 3-1 : Start Talking after Making Call / Call from DOORPHONE
– Confirmation Tone—Tone 3-2 : Start Talking after Answering Call
– Confirmation Tone—Tone 4-1 : Start Conference
– Confirmation Tone—Tone 4-2 : Finish Conference
– Confirmation Tone—Tone 5 : Hold
Feature Guide References
2.25.2 Confirmation Tone
Data Line Security
• 10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main—Features—
Data Line Security
Set / Cancel
• 12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—Option 2— Data
Mode
Feature Guide References
2.11.5 Data Line Security
Dial Tone
• 10.9 PBX Configuration—[2-9] System—System Options—Option 3
– Dial Tone—Distinctive Dial Tone
– Dial Tone—Dial Tone for Extension
– Dial Tone—Dial Tone for ARS
Feature Guide References
2.25.1 Dial Tone
Dial Tone Transfer
• 12.1.4 PBX Configuration—[4-1-4] Extension—Wired Extension—Flexible Button
–
Type
– Parameter Selection (for TRS Level Change)
• 12.2.3 PBX Configuration—[4-2-3] Extension—Portable Station—Flexible Button
– Type
– Parameter Selection (for TRS Level Change)
Feature Guide References
2.7.4 Dial Tone Transfer
PC Programming Manual 1019
Feature Programming References