How to resolve distorted external music on Panasonic PBX?
If you are experiencing distorted external music with your Panasonic PBX, the input level from the external music source might be too high. Decrease the output level of the external music source using its volume control.
Why does PT not ring on Panasonic PBX?
If the PT (Proprietary Telephone) does not ring on your Panasonic PBX, check the ringer volume. If the ringer volume is off, turn it on.
General| Brand | Panasonic |
|---|---|
| Model | KX-T30865 |
| Category | Intercom System |
| Language | English |
Contains the basic system installation and wiring instructions, as well as how to install the optional cards and units.
Describes all the basic, optional, and programmable features in alphabetical order.
Provides step-by-step programming instructions for a proprietary telephone.
Provides information for system and telephone troubleshooting.
Details the basic and expanded system capacities for CO lines and extensions.
Explains how expansion modules increase system capacity by adding CO lines and extensions.
Provides backup power supply for system operation during power failure.
Permits connecting two systems together to double system capacity.
Outlines basic safety precautions to reduce risk of fire, electric shock, and injury during wiring.
Provides instructions for proper wiring to avoid interference and damage.
Provides instructions for mounting the main unit on wooden or concrete walls.
Emphasizes the importance of connecting the main unit's frame to earth ground for safety.
Illustrates the overall system connections for KX-TD816 and KX-TD1232 units.
Details connecting digital proprietary telephones, single line telephones, and DSS consoles.
Shows where optional cards and units are installed in the KX-TD816 and KX-TD1232.
Explains the importance and installation of lightning protectors for CO lines and system protection.
Explains how to connect two main units together to expand system capacity.
Specifies CO line connections to extension jacks and transfer jacks during power failure for KX-TD816.
Specifies CO line connections to transfer jacks for Master/Slave systems during power failure for KX-TD1232.
Provides step-by-step instructions for the initial startup and system initialization for KX-TD816.
Details the initial startup procedure for the KX-TD1232, including system clear switch operation.
Explains that certain features are cleared upon system restart and provides caution for system clear switch usage.
Automatically selects the least expensive route for outgoing calls based on programmed plans.
Prohibits extension users from placing unauthorized toll calls, based on Class of Service.
Routes incoming calls directly to destinations based on subscriber numbers from the Central Office.
Provides default factory settings and requirements for system programming, including telephone sets and modes.
Outlines programming items accessible by any display DPT user and how to enter the mode.
Sets the current date and time for the system, including day of the week and AM/PM.
Assigns an extension number to each extension jack, supporting 2-4 digit numbers.
Assigns jack numbers for manager and operator extensions, defining their system access capabilities.
Assigns the password required for system programming mode and PC maintenance access.
Assigns the type of expansion cards/units to be used in each expansion location.
Sets DTMF command signals for Voice Mail (VM) and Automated Attendant (AA) services.
Sets the maximum time allowed for conversations with outside parties.
Sets the number of times Automatic Redial is attempted for last dialed or saved numbers.
Stores up to 10 emergency call numbers not subject to toll restriction or lockout.
Turns Automatic Route Selection (ARS) on or off, enabling selection of the least expensive route.
Assigns each CO line to DTMF, pulse (rotary), or call blocking mode.
Assigns received DID subscriber numbers and programs removed digits from the beginning.
Sets toll restriction values for each Class of Service (COS) in day or night mode.
Restricts the duration of outside calls based on Class of Service (COS).
Allows a single line telephone to connect to the same jack as a DPT, working as independent extensions.
Programs each extension for a Class of Service (COS), determining call handling abilities.
Assigns each extension to an extension group for Group Call Pickup, Station Hunting, and Paging.
Determines which calls produce an SMDR printout for outgoing and incoming calls.
Assigns communication parameters for the EIA (RS-232C) interface for printers or PCs.
Adds various programming items, including area-specific fields for system configuration.
Sets allowed digits for outside calls based on COS, and enables/disables Call Forwarding – Follow Me.
Lists and illustrates various system tones, including confirmation, dial, and busy tones.
Illustrates ring tone patterns for intercom, CO calls, and doorphone calls.
Lists default settings for manager programming items like Date/Time and Speed Dialing.
Lists default settings for system programming items like Flexible Numbering and Station Hunting.
Addresses common problems during installation, such as extension operation and connection issues.
Guides on troubleshooting connection issues between DSHS and telephones.
Explains the function of the Reset Button and System Clear Switch for system recovery.
To Next Page
