Panasonic SP28P - Page 141

Page 5-19
SETTING PRODUCTION
MATERIALS
5
6. Press Counter reset .
• “Counter reset” screen is displayed.
7. Press Reset of the past count.
• The paste count is reset.
8. Press .
• “Cycle stop” screen is displayed.
9. Turn ON the servo switch.
10. Press
UNLOCK
→→
→→
→
START
on the operating
panel.
• Production is resumed.
1E4C-E-OMA05-A02-01
How to Supply Solder
193C-EOp-PcCr-002
OFF ( )
ON ( )
SERVO
OFF ( )
ON ( )
SERVO
STOP
UNLOCK
STEP
START
LIGHT ON
SELECT
KEY LOCK BACK LIGHT OFF
2
1