8686_en_01 PHOENIX CONTACT 141
B 2 List of tables
Section 2
Table 2-1: Diagnostics and status indicators of the controller............................... 21
Table 2-2: Controller operating modes ................................................................. 24
Table 2-3: Controller's response following actuation of the reset button............... 26
Section 3
Table 3-1: Behavior of device LEDs following power supply switch-on ................ 45
Section 4
Table 4-1: USB driver for using USB device recognition under Windows ............. 47
Table 4-2: MAC addresses of Ethernet interfaces X1, X2, and X3........................ 49
Table 4-3: IP address settings in the example ...................................................... 49
Table 4-4: Version information for “Download Changes” ...................................... 77
Table 4-5: Overview of the function blocks ........................................................... 84
Table 4-6: Overview of the function blocks ........................................................... 85
Table 4-7: Inputs of the CNT1 and CNT2 function blocks..................................... 87
Table 4-8: Outputs of the CNT1 and CNT2 function blocks .................................. 88
Table 4-9: Status values of the STATUS output (ERROR = TRUE)...................... 89
Table 4-10: Counter operating modes .................................................................... 90
Table 4-11: Overview of the function blocks ........................................................... 93
Section 6
Table 6-1: System variables of the diagnostic status register ............................. 111
Table 6-2: System variables of the diagnostic parameter register ...................... 112
Table 6-3: PROFINET system variables (PROFINET controller functionality) .... 113
Table 6-4: PROFINET system variables (PROFINET device function) ............... 114
Table 6-5: System variables of the IEC 61131 runtime system ........................... 116
Table 6-6: System variables of the control processor ......................................... 117
Table 6-7: System variable of the control processor........................................... 117
Table 6-8: System variables of the parameterization memory ............................ 117
Table 6-9: System variables of the USB memory stick ....................................... 118
Table 6-10: System variables of the power storage and realtime clock ................ 118
Table 6-11: System variables of the power supplies............................................. 118
Table 6-12: System variables of the mode selector switch ................................... 118