Pixsys MCM260X User Manual

Manuale d’uso - MCM260X - 21
5.5 Table of the configuration parameters that can be
accessible from the terminal and via the MyPixsys app
COMM Communication interface
It selects the communication interface that will be used by the instrument for the connection to
the communication bus. Depending on the interface selected, the CANopen (slave) protocol or
the Modbus RTU protocol (slave) will be activated.
CAN
485
(default)
SL. Ad Slave CANopen address
Indicates the address assigned to the communication module in a CANopen network.
1 . .1 2 7 (default 1)
bd . rt CANopen bus speed
Indicates the communication speed of the module in CANopen mode.
50K
62.5k
100k
125k
250 k
500k
1Mb
(default)
SL. AD Modbus slave address
Indicates the address assigned to the communication module in a Modbus network.
1...254 (default 1)
bd . rt Modbus bus speed
Indicates the communication speed of the module in Modbus mode.
2400
4800
9600
19.2
28.8
38 .4
57.6
(default)
11 5 . 2
S. P. P. Modbus data format
Indicates the format of the serial data of the module in Modbus mode.
8 . n .1 (default)
8 . o .1
8 . E.1
8. n .2
8. o .2
8.E.2
SE. d E Response delay in Modbus (ms)
Indicates the minimum time from receiving the query after which the module will forward its
response to the master in Modbus mode.
0...250 (default 1)

Pixsys MCM260X Specifications

General

Brand	Pixsys
Model	MCM260X
Category	Network Hardware
Language	English