Planet FGSD-1022P - Page 126

User’s Manual of FGSD-1022 Series
126
The page includes the following fields:
 IPv4 ACL
Object Description Default Vaule
Group ID
1 ~ 220 (max. 220 ACL group).
1 ~ 200 (FGSD-1022HP only)
Action
Permit / Deny.
 Permit: Permit packet cross switch.
 Deny: Drop packet.
Permit
VLAN
Any / VID.
 Any: Any VLAN id.
 VID: 1~4094. A certain VLAN id.
Any
Packet Type
IPv4 / Non-IPv4 / Binding
 IPv4: Set Ipv4 packet field.
 Non-IPv4: Set non-Ipv4 packet field.
 Binding: Set binding entry.
IPv4
Src IP Address
Set this field if Packet Type is IPv4, else ignore.
Any / IP and Mask
 Any: Any IP address.
 IP: A certain IP address.
Mask: ***.***.***.***
* is represent a digit from 0~9,
*** is range from 0 to 255
Notice: This is not subnet mask.
Any
Dst IP Address
Set this field if Packet Type is IPv4, else ignore.
Any / IP and Mask
 Any: Any IP address.
 IP: A certain IP address.
Mask: ***.***.***.***
* is represent a digit from 0~9,
*** is range from 0 to 255
Any
IP Fragment
Set this field if Packet Type is IPv4, else ignore.
Uncheck / Check
 Uncheck: Not check IP fragment field.
 Check: Check IP fragment field.
Uncheck
L4 Protocol
Set this field if Packet Type is IPv4, else ignore.
Any / ICMP(1) / IGMP(2) / TCP(6) / UDP(17)
Any
Protocol
Set this field if Packet Type is IPv4, else ignore.
0~255.
If protocol not find in L4 Protocol field, you can direct assign