Planet FGSD-1022P - Page 128

User’s Manual of FGSD-1022 Series
128
 Binding
Let device that has specific IP address and MAC address can use network. We can set specific IP address, MAC address,
VLAN id and port id to bind, and device can cross switch if all conditions match.
Use binding function; we should enable it first in following page.
In ※Packet Type / Binding box should select ※Binding.
Object Description Default Vaule
Group ID
1 ~ 220 (max. 220 ACL group)
Action
Permit / Deny.
 Permit: Permit packet cross switch.
 Deny: Drop packet.
Permit
VLAN
Any / VID.
 Any: Any Vlan id.
 VID: 1~4094. A certain vlan id.
Any
Packet Type
IPv4 / Non-IPv4 / Binding
 IPv4: Set Ipv4 packet field.
 Non-IPv4: Set non-Ipv4 packet field.
 Binding: Set binding entry.
IPv4
MAC Address
**:**:**:**:**:**
* is represent a digit from 0~9 and A~F,
*** is range from 0 to FF.
00:11:22:33:44:55
IP Address
***.***.***.***
* is represent a digit from 0~9,
*** is range from 0 to 255.
0.0.0.0
Port Id
Source port id, from 1~10. 1
Current List
You create ACL and Binding groups.