Planet IGSW-24040T - Page 182

User’s Manual of IGSW-24040T
Figure 4-9-10 Rate Limit Configuration Page Screenshot
The page includes the following fields:
Object Description
 Port
The logical port for the settings contained in the same row.
 Policer Enabled
Enable or disable the port policer. The default value is "Disabled".
 Policer Rate
Configure the rate for the port policer. The default value is "500". This value is
restricted to 500-1000000 when the "Policer Unit" is "kbps", and it is restricted to
1-1000 when the "Policer Unit" is "Mbps"
 Policer Unit
Configure the unit of measure for the port policer rate as kbps or Mbps. The
182