User’s Manual of IGSW-24040T
Set or show the multicast storm rate limiter.
Syntax:
QoS S
torm Multicast [enable
|disable] [<packet_rate>]
Parameters:
enable : Enable multicast storm control
disable : Disable multicast storm control
<packet_rate>: Rate in pps (1, 2, 4, ..., 512, 1k, 2k, 4k, ..., 1024k)
Default Setting:
Disabled, 1pps
Example:
Enable multicast storm rate limiter in 1kpps
SWITCH/>qos storm multicast enable 1k
QoS Strom Broadcast
Description:
Set or show the multicast storm rate limiter.
Syntax:
QoS S
torm Broadcast [enabl
e|disable] [<packet_rate>]
Parameters:
enable : Enable broadcast storm control
disable : Disable broadcast storm control
<packet_rate>: Rate in pps (1, 2, 4, ..., 512, 1k, 2k, 4k, ..., 1024k)
Default Setting:
Disabled, 1pps
Example:
Enable broadcast storm rate limiter in 1kpps
SWITCH/>qos storm broadcast enable 1k
461
To Next Page
Loading...
Need help?
General