User’s Manual of IGSW-24040T
fault_en
Description:
Set or show the system fault alarm.
Syntax:
dido fault_en [enable|disable]
Parameters:
<enable>: Enable digital input1/2 function
<disable> : Disable digital input1/2 function
(default: Set or show digital input/output/fault alarm 1/2 status)
Example:
Enable power alarm configuration.
SWITCH/>dido fault_en enable
fault_port_alr
Description:
Set or show the system fault alarm of port alarm.
Syntax:
dido fault_port_alr [<port_list>]
Parameters:
<port_list>: Port list or 'all', default: All ports
Example:
Enable power alarm configuration.
SWITCH/>dido fault_port_alr all
SWITCH/>dido fault_port_alr 1,3,5
SWITCH/>dido fault_port_alr 1-10
fault_pwr_alr
Description:
Set or show the system fault alarm of power alarm.
Syntax:
dido fault_pwr_alr [dc1|dc2|ac] [enable|disable]
495
To Next Page
Loading...
Need help?
General