User’s Manual of IGSW-24040T
SWITCH/>igmp state 1 disable
IGMP Querier
Description:
Set or show the IGMP snooping querier mode for VLAN.
Syntax:
IGMP Querier [<vid>] [enable|disable]
Parameters:
<vid>: VLAN ID (1-4095), default: Show all VLANs
enable : Enable IGMP querier
disable : Disable IGMP querier
(default: Show IGMP querier mode)
Default Setting:
disable
Example:
Enable the IGMP snooping querier mode for VLAN.
SWITCH/>igmp querier 1 enable
IGMP Fastleave
Description:
Set or show the IGMP snooping fast leave port mode.
Syntax:
IGMP Fastleave [<port_list>] [enable|disable]
Parameters:
<port_list>: Port list or 'all', default: All ports
enable : Enable IGMP fast leave
disable : Disable IGMP fast leave
(default: Show IGMP fast leave mode)
430
To Next Page
Loading...
Need help?
General