Planet IGSW-24040T - Fault_Act

User’s Manual of IGSW-24040T
<dc1>: DC power 1
<dc2>: DC power 2
<ac>: AC power
(default: Set or show digital output/fault alarm 1/2 power_fail)
<enable>: Enable digital input1/2 function
<disable> : Disable digital input1/2 function
(default: Set or show digital input/output/fault alarm 1/2 status)
Example:
Enable power alarm configuration.
SWITCH/>dido do_pwr_alr first dc1 enable
SWITCH/>dido do_pwr_alr first dc2 enable
SWITCH/>dido do_pwr_alr first ac enable
fault_act
Description:
Set or show the system fault alarm action.
Syntax:
dido fault_act [port|power] [enable|disable]
Parameters:
<port >: port fail
<power>: power fail
(default: Set or show digital output/fault alarm 1/2 action)
<enable>: Enable digital input1/2 function
<disable> : Disable digital input1/2 function
(default: Set or show digital input/output/fault alarm 1/2 status)
Example:
Enable power alarm configuration.
SWITCH/>dido fault_act port enable
SWITCH/>dido fault_act power enable
494