Planet IGSW-24040T - LACP Statistics

User’s Manual of IGSW-24040T
<port_list>: Port list or 'all', default: All ports
Example:
Show LACP status of port1~4
SWITCH/>lacp status 1-4
Port Mode Key Aggr ID Partner System ID Partner Port
---- -------- ----- ------- ----------------- ------------
1 Disabled 1 - - -
2 Disabled 1 - - -
3 Disabled 1 - - -
4 Disabled 1 - - -
LACP Statistics
Description:
Show LACP Statistics.
Syntax:
LACP Statistics [<port_list>] [clear]
Parameters:
<port_list>: Port list or 'all', default: All ports
clear : Clear LACP statistics
Example:
Show LACP statistics of port1~4
SWITCH/>lacp statistics 1-4
Port Rx Frames Tx Frames Rx Unknown Rx Illegal
------ --------------- --------------- --------------- ----------
1 0 0 0 0
2 0 0 0 0
3 0 0 0 0
4 0 0 0 0
441