Planet IGSW-24040T - Vlav Pvid; VLAN Configuration; VLAN Configuration Command

User’s Manual of IGSW-24040T
6.5 VLAN Configuration Command
VLAN Configuration
Description:
Show VLAN configuration.
Syntax:
VLAN Configuration [<port_list>]
Parameters:
<port_list>: Port list or 'all',
(default: All ports)
Example:
Show VLAN status of port1
SWITCH/>vlan configuration 1
VLAN Configuration:
===================
Mode : IEEE 802.1Q
Port PVID IngrFilter FrameType LinkType Q-in-Q Mode Eth type
---- ---- ---------- ---------- -------- ----------- --------
1 1 Disabled All UnTag Disable N/A
VID Ports
---- -----
1 1-24
VLAV PVID
Description:
Set or show the port VLAN ID.
Syntax:
VLAN PVID [<port_list>] [<vid>|none]
330