User’s Manual of IGSW-24040T
Example:
Set STP recovery value in 30 sec.
SWITCH/>stp recovery 30
STP Status
Description:
Show STP Bridge status.
Syntax:
STP S
tatus [<msti>] [<port_list>]
Parameters:
<msti> : STP bridge instance no (0-7, CIST=0, MSTI1=1, ...)
<port_list>: Port list or 'all', default: All ports
Default Setting:
Disable
Example:
Show up STP Bridge status.
SWITCH/>stp status
CIST Bridge STP Status
Bridge ID : 80:00-00:30:4F:24:04:D1
Root ID : 80:00-00:30:4F:24:04:D1
Root Port : -
Root PathCost: 0
Regional Root: 80:00-00:30:4F:24:04:D1
Int. PathCost: 0
Max Hops : 20
TC Flag : Steady
TC Count : 0
TC Last : -
Port Port Role State Pri PathCost Edge P2P Uptime
--------- -------------- ---------- --- -------- ---- --- -------------
14 DesignatedPort Forwarding 128 20000 Yes Yes 0d 00:10:32
418
To Next Page
Loading...
Need help?
General