Planet IGSW-24040T - Port Flow Control

User’s Manual of IGSW-24040T
Parameters:
<port_list>: Port list or 'all', default: All ports
10hdx : 10 Mbps, half duplex
10fdx : 10 Mbps, full duplex
100hdx : 100 Mbps, half duplex
100fdx : 100 Mbps, full duplex
1000fdx : 1 Gbps, full duplex
auto : Auto negotiation of speed and duplex
(default: Show configured and current mode)
Default Setting:
Auto
Example:
Set 10Mbps (half duplex) speed for port1
SWITCH/>port mode 1 10hdx
Port Flow Control
Description:
Set or show the port flow control mode.
Syntax:
Port Flow Control [<port_list>] [enable|disable]
Parameters:
<port_list>: Port list or 'all', default: All ports
enable : Enable flow control
disable : Disable flow control
(default: Show flow control mode)
Default Setting:
Disable
Example:
Enable flow control function for port1
SWITCH/>port flow control 1 enable
319