User’s Manual of IGSW-24040T
Default:
auto
Example:
Set MSTI2 in port1~2
SWITCH/>stp msti port configuration 2 1-2
MSTI Port Path Cost Priority
---- ---- ---------- --------
MST2 Aggr Auto 128
MSTI Port Path Cost Priority
---- ---- ---------- --------
MST2 1 Auto 128
MST2 2 Auto 128
STP MSTI Port Cost
Description:
Set or show the STP CIST/MSTI port path cost.
Syntax:
STP Msti Port Cost [<msti>]
[<port_list>] [<pa
th_cost>]
Parameters:
<msti> : STP bridge instance no (0-7, CIST=0, MSTI1=1, ...)
<port_list> : Port list or 'all'. Port zero means aggregations.
<path_cost> : STP port path cost (1-200000000) or 'auto'
Default:
auto
Example:
Set MSTI7 in port1
SWITCH/>stp msti port cost 7 1
MSTI Port Path Cost
---- ---- ----------
426
To Next Page
Loading...
Need help?
General