User’s Manual of IGSW-24040T
Mirror SID
Description:
Set or show the mirror switch ID.
Syntax:
Mirror SID [<sid>]
Parameters:
<sid>: Switch ID (1-16)
Default Setting:
1
Example:
Set SID2 for mirror switch ID.
SWITCH/>mirror sid 2
Mirror Mode
Description:
Set or show the mirror mode.
Syntax:
Mirror Mode [<port_list>] [enable|disable|rx|tx]
Parameters:
<port_list>: Port list or 'all', default: All ports
enable : Enable Rx and Tx mirroring
disable: Disable Mirroring
rx : Enable Rx mirroring
tx : Enable Tx mirroring
(default: Show mirror mode)
Default Setting:
disable
464
To Next Page
Loading...
Need help?
General