User’s Manual of IGSW-24040T
Port Power
Description:
Set or show the port PHY power mode.
Syntax:
Port Power [<port_list>] [enable|disable|actiphy|dynamic]
Parameters:
<port_list>: Port list or 'all', default: All ports
enable : Enable all power control
disable: Disable all power control
actiphy: Enable ActiPHY power control
dynamic: Enable Dynamic power control
Default Setting:
Enable
Example:
Disable port power function for port1-4
SWITCH/>port power 1-4 disable
Port SFP
Description:
Show SFP port information.
Syntax:
Port SFP [<port_list>]
Parameters:
<port_list>: Port list or 'all', default: All ports
Example:
Show SFP information for port21-24
SWITCH/>port sfp
Port Type Speed Wave Length(nm) Distance(m)
321
To Next Page
Loading...
Need help?
General