Planet IGSW-24040T - 6.17 Firmware Command; Firmware Load; Firmware IPv6 Load

User’s Manual of IGSW-24040T
6.17 Firmware Command
Firmware Load
Description:
Load new firmware from TFTP server.
Syntax:
Firmware Load <ip_addr_string> <file_name>
Parameters:
<ip_addr_string>: IP host address (a.b.c.d) or a host name string
<file_name> : Firmware file name
Firmware IPv6 Load
Description:
Load new firmware from IPv6 TFTP server.
Syntax:
Firmware IPv6 Load <ipv6_server> <file_name>
Parameters:
<ipv6_server>: TFTP server IPv6 address
467