Planet IGSW-24040T - Do_Act; Do_En

User’s Manual of IGSW-24040T
Do_act
Description:
Set or show the system digital output1/2 action.
Syntax:
do_act [first|second] [port|power] [enable|disable]
Parameters:
<first >: Digital input/output 1
<second>: Digital input/output 2
(default: Set or show digital input/output first(1)/second(2) select)
<port>: port fail
<power>: power fail
(default: Set or show digital output/fault alarm 1/2 action)
<enable>: Enable digital input1/2 function
<disable>: Disable digital input1/2 function
(default: Set or show digital input/output/fault alarm 1/2 status)
Example:
Set digital output action.
SWITCH/>dido do_act first port enable
SWITCH/>dido do_act first power enable
Do_en
Description:
Set or show the system digital output1/2.
Syntax:
do_en [first|second] [enable|disable] [hightolow|lowtohigh]
Parameters:
<first >: Digital input/output 1
<second>: Digital input/output 2
(default: Set or show digital input/output first(1)/second(2) select)
<enable>: Enable digital input1/2 function
<disable> : Disable digital input1/2 function
(default: Set or show digital input/output/fault alarm 1/2 status)
492