Planet IGSW-24040T - Security Network NAS Holdtime; Security Network NAS Radius_Qos

User’s Manual of IGSW-24040T
Default Setting:
300
Example:
Set NAS age time in 1000sec
SWITCH/>security network nas agetime 1000
Security Network NAS Holdtime
Description:
Time in seconds before a MAC-address that failed authentication gets a new authentication chance.
Syntax:
Security Network NAS Holdtime [<hold_time>]
Parameters:
<hold_time>: Hold time before MAC addresses that failed authentication expire
(default: Show current hold time)
Default Setting:
10
Example:
Set NAS hold time in 100sec
SWITCH/>security network nas holdtime 100
Security Network NAS RADIUS_QoS
Description:
Set or show either global enabledness (use the global keyword) or per-port enabledness of RADIUS-assigned QoS.
Syntax:
Security Network NAS RADIUS_QoS [global|<port_list>] [enable|disable]
Parameters:
global : Select the global RADIUS-assigned QoS setting
<port_list>: Select the per-port RADIUS-assigned QoS setting
384