Planet IGSW-24040T - Upnp TTL; Upnp Advertising Duration

User’s Manual of IGSW-24040T
SWITCH/>upnp mode enable
UPnP TTL
Description:
Set or show the TTL value of the IP header in SSDP messages.
Syntax:
UPnP TTL [<ttl>]
Parameters:
<ttl>: ttl range (1..255), default: Show UPnP TTL
Default Setting:
4
Example:
Set the value 10 for TTL value of the IP header in SSDP messages.
SWITCH/>upnp ttl 10
UPnP Advertising Duration
Description:
Set or show UPnP Advertising Duration.
Syntax:
UPnP Advertising Duration [<duration>]
Parameters:
<duration>: duration range (100..86400), default: Show UPnP duration range
Default Setting:
100
Example:
Set value 1000 for UPnP Advertising Duration.
SWITCH/>upnp advertising duration 1000
469