Planet IGSW-24040T - System Contact; System Location

User’s Manual of IGSW-24040T
Example:
To set device title:
Switch/>System name IGSW-24040T-LAB
System Contact
Description:
Set or show the system contact.
Syntax:
System Contact [<contact>]
Parameters:
<contact>: System contact string. Use 'clear' or "" to clear the string.
No blank or space characters are permitted as part of a contact. (only in CLI)
Default Setting:
empty
Example:
To set device contact:
Switch/>System contact IGSW-24040T-Test
System Location
Description:
Set or show the system location.
Syntax:
System Location [<location>]
Parameters:
<location>: System location string. Use 'clear' or "" to clear the string
In CLI, no blank or space characters are permitted as part of a contact.
Default Setting:
empty
304