User’s Manual of IGSW-24040T
Buttons
Auto-refresh : Check this box to enable an automatic refresh of the page at regular intervals.
: Click to refresh the page; any changes made locally will be undone.
4.2.2 IP Configuration
The IP Configuration includes the IP Address, Subnet Mask and Gateway. The Configured column is used to view or change the
IP configuration. Fill up the IP Address, Subnet Mask and Gateway for the device. The screen in Figure 4-2-2 appears.
Figure 4-2-2 IP Configuration Page Screenshot
The Current column is used to show the active IP configuration.
Object Description
ï‚· DHCP Client
Enable the DHCP client by checking this box. If DHCP fails and the configured IP
address is zero, DHCP will retry. If DHCP fails and the configured IP address is
non-zero, DHCP will stop and the configured IP settings will be used. The DHCP
client will announce the configured System Name as hostname to provide DNS
lookup.
ï‚· IP Address
Provide the IP address of this switch in dotted decimal notation.
ï‚· IP Mask
Provide the IP mask of this switch dotted decimal notation.
ï‚· IP Router
Provide the IP address of the router in dotted decimal notation.
51
To Next Page
Loading...
Need help?
General